Pompa dell'acqua Einhell GE-WW 1145 ECO

The Einhell GE-WW 1145 ECO water pump is designed for reliable water supply tasks in domestic and light commercial settings. Equipped with a 1100 W motor, the pump delivers up to 4,500 liters per hour and reaches a maximum operating pressure of 4.8 bar. With a delivery head of up to 48 meters and a G1 threaded 1 1/4" suction port, the unit is suited for boosting water supply, garden irrigation and transferring water between containers. The pump's compact footprint (330 mm width, 525 mm depth, 728 mm height) and 1.5 m power cable simplify installation and placement in utility rooms, basements or outdoor housings.

Advantages

The GE-WW 1145 ECO combines a powerful 1100 W motor with an efficient hydraulic design to provide a steady flow rate of up to 4,500 l/h and a high delivery head up to 48 m. The pump supports standard AC supply (220–240 V), enabling straightforward connection to household mains. Its compact dimensions make it easier to install in confined spaces, while the G1 threaded suction connection ensures compatibility with common hoses and fittings. The construction and balanced performance make it suitable for repeated daily use in a variety of water handling tasks.

Suitable for

• Garden irrigation and lawn watering
• Boosting household water pressure
• Filling and emptying water tanks, cisterns and barrels
• Water transfer for construction or cleaning purposes

Key specifications

• Power input: 1100 W
• Maximum flow rate: 4,500 liters per hour
• Maximum operating pressure: 4.8 bar
• Maximum delivery head: 48 meters
• Power supply: AC 220–240 V
• Suction port: 1 1/4" with G1 threaded connection
• Dimensions (W×D×H): 330 × 525 × 728 mm
• Power cable length: 1.5 meters

How to use

Position the pump on a firm, level surface close to the water source and connect the suction hose to the G1 1 1/4" threaded port, ensuring tight, leak-free fittings. Connect the discharge hose or piping to the outlet and check that all connections are secure. Connect the power cable to a properly rated AC 220–240 V supply with suitable earthing. Prime the pump if required by filling the suction line and pump housing with water, then switch on the motor. Monitor pressure and flow during operation and avoid running the pump dry. After use, switch off the power, disconnect hoses if necessary and store the unit in a frost-free, dry location to prevent damage.

Recommendations

Do not run the pump dry; always ensure the suction line is filled with water before starting. Use appropriate hoses and fittings rated for the pump’s maximum pressure. For installations with extended suction lifts or long discharge runs, verify flow and pressure to ensure the pump meets application requirements.