Anycubic filamento ABS 1,75 mm giallo HABVY-103

Engineers prototyping functional brackets and enclosures on their FDM printers will appreciate the toughness of this yellow ABS filament. It extrudes cleanly at 220–250°C, and when paired with a heated bed at 80–110°C, parts come out with low warping and a matte-to-semi-gloss finish. The 1 kg spool is vacuum-sealed with desiccant to keep moisture out, and the ±0.02 mm diameter tolerance ensures consistent feeding through Bowden or direct-drive extruders.

Key specifications

• Material: ABS (Acrylonitrile Butadiene Styrene)
• Diameter: 1.75 mm
• Colour: Yellow
• Spool weight: 1 kg
• Print temperature: 220–250 °C
• Heated bed temperature: 80–110 °C
• Dimensional tolerance: ±0.02 mm
• Density: 1.04 g/cm³
• Tensile strength: 40–50 MPa
• Elongation at break: 15–30%
• Heat deflection temperature: 85 °C (0.45 MPa)
• Shore hardness: D65–D75
• Shrinkage rate: 0.5–0.7%
• Vacuum sealed: Yes

Why choose it

ABS is the go-to for parts that need to survive real-world stress—think drone frames, tool handles, or automotive clips. This filament's tight diameter control prevents clogs and under-extrusion, while the consistent melt flow reduces stringing. The yellow colour is vivid and easy to see during assembly, and the spool winds evenly for tangle-free printing.

Ideal use cases

• Functional prototypes that need impact resistance
• Mechanical parts like gears, brackets, and mounts
• Enclosures for electronics that may get warm
• Tools and jigs for workshop use
• Automotive interior components

Good to know

Store the spool in a dry place at 15–25 °C when not in use. ABS emits a slight odour during printing, so use a well-ventilated area or an enclosure. For best layer adhesion, keep the print chamber warm and avoid drafts. The spool fits most standard 3D printer holders with a 52 mm inner diameter.