Alimentatore/inverter Triton 76000965 per router, per interni 30 W, ingresso 100–240 V, nero, cavo 1,5 m

The Triton 76000965 is a 30 W indoor power adapter and inverter designed for routers and similar network devices. It accepts a wide AC input range of 100–240 V at 50–60 Hz and provides a regulated 5 V DC output at up to 6 A through a 5.5 x 2.5 x 9.5 mm locking-barrel plug. The compact black housing (118 × 54 × 37 mm) and a 1.5 m (5 ft) cable suit typical home and office installations. The unit meets UL, cUL and CE safety standards and includes an IEC 60320/C6 input with four interchangeable regional connectors (US, EU, UK, AU).

Advantages

The adapter delivers a stable low-voltage DC output with up to 30 W of continuous power, suitable for prolonged router operation. Its wide input voltage range and interchangeable plugs allow use in multiple countries without additional converters. The locking-barrel output plug provides a secure connection to compatible devices, while the compact size and 1.5 m cord simplify placement and cable routing. Recognized safety certifications ensure compliance with common regulatory requirements for indoor network equipment.

Suitable for

• Powering home and small office routers and modems that require 5 V DC, up to 6 A
• Network switches and access points with compatible 5.5 x 2.5 mm locking-barrel inputs
• Replacement or backup adapter for compatible network devices when travelling between regions (using supplied interchangeable plugs)

Key specifications

• Input voltage: 100–240 V AC
• Input frequency: 50–60 Hz
• Input plug interface: IEC 60320/C6 with interchangeable US, EU, UK and AU connectors
• Output voltage: 5 V DC
• Maximum output current: 6 A
• Maximum output power: 30 W
• Output connector: 5.5 x 2.5 x 9.5 mm locking-barrel plug
• Operating temperature range: 0 °C to 40 °C
• Storage temperature range: -10 °C to -80 °C
• Dimensions: 118 × 54 × 37 mm
• Cable length: 1.5 m (5 ft)
• Colour: Black
• Certifications: UL, cUL, CE

How to use

Choose the interchangeable mains connector that matches the local socket and attach it to the IEC 60320/C6 input. Connect the adapter to a mains outlet within the specified 100–240 V, 50–60 Hz range. Insert the locking-barrel output plug into the device requiring 5 V DC, ensuring the plug is fully seated and locked. Verify that the connected device accepts a 5 V, up to 6 A supply before powering on. Place the adapter in a ventilated indoor location and avoid covering it during operation.

Recommendations

Use the adapter indoors within the operating temperature range and avoid exposure to moisture or direct sunlight. Verify polarity and connector compatibility before connecting to sensitive network equipment. Allow clearance around the adapter for ventilation and disconnect from mains before cleaning or replacing connectors.