Combo RC HOBBYWING Ezrun MAX10 G2S 80A con 3652SD-4100kV-G3

This combo pairs the Ezrun MAX10 G2S ESC with 80A continuous and 520A peak current with the matching Ezrun 3652SD G3 sensored brushless motor rated 4100kV into a factory-matched 1/10 scale drivetrain package.

The ESC runs on 2-3S LiPo and adds, over the MAX10 G2, a Bluetooth module built into the power switch that handles parameters, data logging and firmware straight from a smartphone via the HW LINK app, plus a third BEC step of 8.4V for high-voltage servos.

Turbo timing up to 20 degrees is only available with Hobbywing motors and raises maximum RPM by up to approx. 25%.

• ESC and motor are both dust- and waterproof to IP67.

1/10 drivetrain combo with MAX10 G2S 80 A ESC and 3652SD G3 4100kV motor

This combo pairs the Ezrun MAX10 G2S 80 A ESC with the matching Ezrun 3652SD G3 motor rated 4100kV in a factory-matched 1/10 scale drivetrain package.

Compared with the MAX10 G2, the MAX10 G2S retains the same power ratings and case.

The HW LINK app provides parameter setup, data review and firmware updates.

The G2S adds internal data logging and an 8.4 V BEC setting for high-voltage servos.

Turbo timing can only be enabled with Hobbywing motors; motor overheat protection likewise requires a supported Hobbywing motor.

• Both functions are available with the supplied Ezrun 3652SD G3.

Highlights

Bluetooth module integrated into the power switch for smartphone programming without extra devices

Internal logging of the last 10 minutes of runtime, with graphical review in the HW LINK app

Turbo timing up to 20 degrees, raising maximum RPM by up to approx. 25% with the supplied motor

• Three-step BEC: 6 V / 7.4 V / 8.4 V at 5 A in switch mode
• Frameless fan with side air discharge, switched on by temperature

ESC and motor dust- and waterproof to IP67, with waterproof sensor cable

Capacitor overheat protection; protection against low voltage, overheating and loss of signal

4-pole rotor for high torque, quick acceleration and stable performance; CNC-machined aluminium motor housing and high-precision bearings

ESC (Ezrun MAX10 G2S 80A)

• Type: 1/10 brushless, sensored and sensorless
• Current (Cont./Peak): 80 A / 520 A
• Input Voltage: 2–3S LiPo
• BEC: 6 V / 7.4 V / 8.4 V adjustable, 5 A continuous (switch mode)
• Motor Limit: 2S LiPo: KV ≤ 6000 / 3S LiPo: KV ≤ 4200 (3652/3665 size motor)
• Fan: Yes, powered by the BEC
• Programming: Bluetooth (HW LINK app) / LCD program box / OTA program module
• Programming Port: Separate, 3-pin
• Waterproof: Yes, to IP67
• Input: XT60
• Output: Gold bullet sockets
• Dimensions: 53 × 39.5 × 37.2 mm
• Weight: 125 g (incl. wires and connectors)
• Application: 1/10 On-Road, Buggy, Rally and Short Course Truck

Motor (Ezrun 3652SD G3)

• Type: Brushless, Sensored
• kV Rating: 4100kV
• No-Load Current: ≤ 5.0 A
• Cells: 2–3S LiPo
• Poles: 4
• Length: 53 mm
• Diameter: 37 mm
• Shaft Diameter: 3.175 mm
• Weight: 228 g
• Application: 1/10 On-Road / Off-Road Short Course Truck (light duty)

In the box

• 1× Ezrun MAX10 G2S ESC 80A
• 1× Ezrun 3652SD G3 motor rated 4100kV
• A 3S battery or larger is required for 7.4 V or 8.4 V at the BEC.
• The effective Bluetooth range is approx. 5 m by design.
• Optional accessories: LCD Program Box Pro (HW30502002), OTA Bluetooth Program Module (HW30850400).
• Turbo Timing: up to 20 degrees
• Brand: Hobbywing