Materiale per stampa 3D Flashforge PO2 acido polilattico PLA arancione 500 g

Flashforge PO2 3D Printing Material is a polylactic acid (PLA) filament in bright orange, supplied in a 500 g spool and compatible with any brand of 3D printer. The filament uses an upgraded formulation to provide stable flow, reduced wire-drawing and a cleaner, brighter print surface. Manufactured from high-purity PLA in a dust-free environment, each spool is diameter-checked for consistent printing performance.

Advantages

The new upgraded formulation minimizes common filament issues such as warping, curling and bubbles during printing while anti-moisture additives extend storage life without rapid quality degradation. Production in a dust-free workshop and strict quality control reduce nozzle clogs and ensure smooth, detailed 3D models. Dimensional accuracy is maintained within +/- 0.02 mm and each spool is validated by long-duration test prints.

Suitable for

• Prototyping and concept models
• Detailed decorative and display prints
• Educational projects and classroom use
• Any FDM/FFF 3D printer compatible with PLA filament

Key specifications

• Brand: Flashforge
• Model / MPN: PO2
• Material: Polylactic acid (PLA)
• Colour: Orange
• Weight: 500 g
• Diameter tolerance: ±0.02 mm
• Compatibility: Any brand of FDM/FFF 3D printer
• Packaging: Boxed spool

How to use

Load the Flashforge PO2 PLA filament into your 3D printer according to the printer manufacturer’s instructions. Use typical PLA printing temperatures and settings for your machine and nozzle size, and verify filament feeding before starting large prints. Monitor the first layers to confirm adhesion and correct extrusion. Use standard bed preparation methods for PLA such as blue painter’s tape, glue stick or a suitable build surface.

Recommendations

Store the filament in a dry, cool place and use sealed packaging or desiccant to minimize moisture absorption. Consume remaining filament inches to avoid leaving short lengths that may absorb moisture. Follow your printer’s recommended PLA temperature range and print slow for fine-detail models to reduce risk of defects.