Nastro per montaggio Tesa Powerbond trasparente 1,5 m 19 mm

tesa Powerbond TRANSPARENT is a crystal-clear, extra-thin mounting tape for indoor use that creates a fast, secure and permanent hold on smooth, sufficiently firm surfaces. Supplied as a 1.5 m long, 19 mm wide tape, it bonds to glass, mirrors, tiles, wood and most plastics. Under good bonding conditions, a 10 cm strip can hold up to 2 kg, making the tape suitable for mounting flat objects up to 10 mm thick without visible fasteners.

Advantages

The transparent design provides an almost invisible fixing on delicate and visible surfaces. Extra-thin construction keeps joined parts close together and reduces visibility of the joint. High adhesive strength gives a durable hold of up to 2 kg per 10 cm strip under optimum conditions. Easy handling — the tape can be cut with ordinary scissors and applied without special tools.

Suitable for

• Mounting glass decorations and mirrors
• Fixing lightweight shelves, plaques or signs on tiles and plaster
• Attaching trims and plastic parts to wood or other smooth surfaces
• DIY projects where an invisible bond is required

Key specifications

• Brand: Tesa
• Product: Powerbond TRANSPARENT mounting tape
• Length: 1.5 m
• Width: 19 mm
• Holding capacity: up to 2 kg per 10 cm strip (in good bonding conditions)
• Suitable substrate thickness: flat objects up to 10 mm thick
• EAN: 4042448843142
• MPN: 55743-00001-00

How to use

Ensure both surfaces are clean, dry and free of dust, grease and loose particles. Cut the required length with scissors, apply the tape to one surface and press firmly along the taped area to ensure contact. Remove the protective liner if present and press the second surface onto the tape, applying even pressure for several seconds. Allow time for the adhesive to develop its full strength before loading; in optimal conditions a 10 cm strip can hold up to 2 kg.

Recommendations

Use on smooth, sufficiently firm and load-bearing substrates only. Avoid application on rough, powdery or weak surfaces and on materials sensitive to solvents. For heavy loads or safety-critical applications, use mechanical fixings or a stronger mounting solution. Temperature and surface preparation affect bond strength; test on an inconspicuous area if unsure.