Set filamento AnyCubic HPL20-101-4 – confezione da 4 bobine per la stampa 3D

AnyCubic PLA filament set (4 pcs) — model HPL20-101-4 — is a pack of four 1 kg spools of 1.75 mm PLA designed for FDM/FFF 3D printing. Manufactured in cooperation with Pantone(TM), the set provides consistent, accurately colored material suitable for hobby and professional use. The filaments offer stable diameter tolerance and material properties that support precise, durable prints and compatibility with most desktop 3D printers.

Advantages

Filaments feature a precise diameter of 1.75 mm with a tolerance of ±0.02 mm, ensuring stable extrusion and accurate detail reproduction. Material properties include a hardness of 81 D and a tensile strength of 61 MPa for good mechanical performance and reduced risk of cracking. The density of 1.23 g/cm³ contributes to solid, stable parts and a smooth surface finish. The set contains four 1 kg spools (net weight each), providing ample material for extended projects and quick spool changes.

Suitable for

• General prototyping and functional prototypes
• Hobby models and decorative prints
• Parts requiring good dimensional accuracy and surface finish
• Continuous or multi-color printing workflows (4-spool pack)

Key specifications

• Manufacturer: AnyCubic
• Model: HPL20-101-4
• Material: PLA
• Diameter: 1.75 ±0.02 mm
• Net weight per spool: 1 kg (4 spools in set)
• Total length (per spool): 330 m
• Hardness: 81 D
• Tensile strength: 61 MPa
• Density: 1.23 g/cm³
• Recommended nozzle temperature: 200–210°C
• Recommended bed heating: 50–60°C

How to use

Load a 1.75 mm spool into your FDM/FFF 3D printer according to the printer manufacturer's filament loading instructions. Set the nozzle temperature to 200–210°C and the heated bed to 50–60°C, calibrate the first layer and extrusion multiplier as needed, then start printing. Monitor the first layers to confirm good adhesion and adjust retraction and print speed based on part geometry and printer characteristics.

Recommendations

Store unused spools in a dry place or sealed bag with desiccant to maintain filament quality. For best surface finish, print with appropriate cooling and fine-tune layer height and print speed. Use adhesive or proper bed leveling if first-layer adhesion issues occur.