Ugello per stampante 3D temprato Flashforge C3P 0,6 mm (MPN 20003131001)

Hardened nozzle compatible with Flashforge C3P 3D printers featuring a 0.6 mm orifice. Designed for extrusion-based FDM printing, this nozzle uses a wear-resistant material to reduce abrasion from composite and filled filaments, helping to maintain consistent flow and restore print quality when replacing worn parts. The 0.6 mm diameter supports faster material deposition and improved reliability with abrasive or high-flow materials.

Advantages

The hardened construction provides increased durability compared to standard brass nozzles, extending service life when printing with abrasive filaments such as carbon-fiber, metal-filled, or glow-in-the-dark blends. A 0.6 mm orifice balances faster extrusion rates with good layer adhesion, reducing clogging risk under higher flow demands. Designed for direct replacement, it helps maintain dimensional accuracy and consistent extrusion over extended print runs.

Suitable for

• Printing with abrasive filaments (carbon-fiber, metal-filled, glass-filled)
• High-flow or large-layer-height prints requiring faster deposition
• Replacing worn or damaged nozzles to restore print consistency
• Professional prototyping and hobbyist projects needing durable extrusion hardware

Key specifications

• Orifice diameter: 0.6 mm
• Compatibility: Flashforge C3P series (extrusion-based printers)
• Material: hardened wear-resistant alloy
• Application: designed for abrasive and standard filaments
• Use case: supports higher flow rates and larger layer heights

How to use

Power off the printer and heat the hotend to the recommended temperature for the previously used filament to safely remove the old nozzle. Use appropriate tools to unscrew the existing nozzle, taking care not to damage the heater block or threads. Install the hardened nozzle and tighten to the manufacturer’s torque recommendations while the hotend is at operating temperature to ensure a proper seal. After installation, perform a calibration print and adjust extrusion multiplier or flow settings if necessary to account for the 0.6 mm orifice.

Recommendations

For best results, use this hardened nozzle when printing abrasive filaments or when longer nozzle life is desired. Maintain recommended printing temperatures for each filament type, perform regular hotend maintenance, and inspect the nozzle periodically for residue buildup. When switching between abrasive and non-abrasive materials, consider a cleaning routine or replacing the nozzle to preserve performance and print quality.