InLine cavo telefonico 16 fili massiccio per installazione 8x2x06mm schermato 25 m

The InLine Telephone Cable 16 wire solid installation 8x2x06mm shielded 25m is a 25-meter beige telephone installation cable with 16 solid conductors arranged as 8 pairs. Conductors are made of CCA (Copper Cladded Aluminum) and pairs are drilled for easy identification. The cable includes an overall foil shield with a drain wire and is sheathed in 0.5 mm thick PVC for mechanical protection.

Advantages

This shielded telephone cable provides reduced electromagnetic interference thanks to its foil shielding and drain wire. CCA conductors offer a cost-effective alternative to pure copper while maintaining adequate electrical performance for telephone wiring. The labeled/drilled pairs simplify installation and the PVC jacket ensures durability in typical indoor and sheltered outdoor environments.

Suitable for

• Fixed telephone line installations in homes and offices
• Internal wiring of telephone distribution panels
• Short-run external runs in sheltered outdoor locations

Key specifications

• Conductor configuration: 16 solid wires (8 pairs)
• Conductor material: CCA (Copper Cladded Aluminum)
• Pair identification: drilled/marked pairs
• Shielding: overall foil shield with drain wire
• Jacket material and thickness: PVC, 0.5 mm
• Cable length: 25 m
• Colour: Beige

How to use

Strip the outer PVC jacket to expose the foil shield and drain wire, then remove the foil at the termination point and connect the drain wire to the common ground. Separate and terminate the required pairs according to the telephone equipment wiring scheme, matching colours/marks on the drilled pairs to the connector or terminal block. Secure the cable with appropriate clamps and avoid sharp bends or excessive tension to maintain signal integrity.

Recommendations

Use this cable for standard telephone wiring where CCA conductors are acceptable; avoid prolonged exposure to direct sunlight and unprotected outdoor conditions. For long external runs or installations requiring maximum conductivity, consider a pure copper cable instead.